Enviroclean (Four Gallon Case)
- Traffic lane cleaner and degreaser
- Environmentally safe & solvent-free
- For use on any surface not damaged by water
- The cleaning power of butyl in a butyl free product
- No Hydrogen Peroxide
Light yellow clear liquid
Odor: Almost odorless
Solubility in Water: Soluable
Before use, read product label & SDS completely. Always pre-test for colorfastness in an inconspicuous place before use.
CLEANING BY CHEMICAL MANAGEMENT SYSTEM: The unit is preset to dispense product at various dilution ratios. Use additional metering tips in order to obtain desired dilution. The dispenser has been pre-tipped for your convenience in a general dilution range.
LOW FLOW: Glass 1:256 (1/2 oz/gal. or 4 ml/l); All-purpose Cleaner 1:32 (4 oz/gal or 30 ml/l); Heavy Duty Cleaner & Degreaser 1:10 (12 oz/gal or 90 ml/l).
HIGH FLOW: Mop/Bucket & Carpet 1:64 (2 oz/gal or 15 ml/l).
STANDARD GALLON DISPENSING FROM SAM PRESS & FILL CHEMICAL MANAGEMENT SYSTEM: For heavier soils, a higher concentration of product may be required. Use additional metering tips provided with dispenser to obtain the desired dilution.
GLASS CLEANER: Dilute at 1:256 (1/2 oz/gal or 4 ml/l of cold water) for everyday glass & mirror cleaning. Spray surfaces & wipe with a lint free cloth.
LIGHT DUTY CLEANING: Dilute at 1:64 (2 oz/gal or 15ml/l of cold water) to 1:32 (4 oz/gal or 30 ml/l of cold water). Spray surface & wipe with a sponge, mop or other cleaning cloth.
MEDIUM DUTY CLEANING: Dilute at 1:32 (4 oz/gal or 30ml/l of cold water) to 1:20 (6 oz/gal or 45ml/l of cold water). Spray surface and wipe with sponge, mop or other cleaning cloth.
HEAVY DUTY CLEANING: Dilute at 1:20 (6 oz/gal or 30 ml/l of cold water) to 1:10 (12 oz/gal or 90 ml/ l of cold water). Spray surfaces & wipe with sponge, mop, or other cleaning cloth.
FOR CLEANING USE MOP & BUCKET: For daily mopping, dilute 1:128 (1 oz/gal or 8 ml/l of cold water). Fill bucket, mop floor, pick up soil & excess cleaner with clean mop. Rinse mops frequently & change solution as needed.
CARPET CLEANING: Test carpet prior to overall cleaning. Do not use product if test area indicates color removal or bleeding, shrinkage or adhesive deterioration. Pre-treat traffic lanes and other heavily soiled areas with Traffic Slammer. Dilute ENVIROCLEAN at 1:64 (2 oz/gal or 15ml/l of cold water). Fill extraction equipment. Clean the carpet following the machine manufacturer’s instructions. DO NOT over wet carpet. If carpet has been previously shampooed, use DEFOAMER in the recovery tank. After cleaning, brush carpet pile in one direction with pile brush or rake. Avoid walking on carpet until thoroughly dry. If furniture is replaced before carpet is dry, place protective pads under legs. When carpet is dry, vacuum thoroughly.