E3expander -Chemical Spray formula
DIRECTIONS FOR CHEMICAL APPLICATION FORMULA (ground/aerial spray applications)
Always read and follow all directions
1. Make sure tank is cleaned and completely flushed.
2. Fill tank to 1⁄2 of the total amount of water.
3. Begin agitation/recirculation.
4. Use 1:300 dilution ratio, or 0.427 ounces per gallon of water.
5. Add E3Expander™ slowly while adding remaining water required.
6. Agitate/recirculate until E3Expander™ is completely dissolved.
7. E3Expander in water will appear nearly clear.
8. Add desired chemicals per their directions, while continuing vigorous agitation.
9. Reduce chemical application rate by 30%.
10. Do not breathe spray mist.
E3Expander™ is a polymer type concentrate, (protected by US Patents pending) which when placed into solution with water and mixed with appropriate agricultural chemicals enhances wetting, adhesion and facilitates redistribution with ambient moisture, thereby increasing protection during plant growth. Provides protection against phytotoxicity and aids as a drift retardant. Some thermal protection may also be provided at higher concentrations. E3Expander™ should be applied with the first and all subsequent sprays.E3Expander™ aids in fruit, foliar and systemic applications. The use of E3Expander™ allows longer durations between chemical applications, resulting in less total chemical usage.
AGRICULTURE USE: After thoroughly mixing E3Expander™ with water, at the appropriate dilution ratio, add chemicals while continuing agitation to allow proper dispersion of ingredients in the diluted E3Expander™matrix. Most Agriculture spray equipment with either in tank mixing or tank to pump recirculation will suffice. Regardless of method of application, thorough wetting of all surfaces must be accomplished for best results.E3Expander™ may be used with most agricultural products unless individual labels of the products specifically prohibit polymers. Evaluation of chemical compatibility including consistency is the sole responsibility of the user.